Walkera Dragongfly 36 Electric 3D Flight RC Helicopter

Newest Design Walkera Dragongfly36 3D Flight Electric RC Helicopter.6CH normal transmitter included, 35MHz or 72MHz and Mode 1 (right hand throttle) or Mode 2 (left hand throttle) available.3D and alterable pitch system. transmitter with 3D model switch, PIT and PLT modulation. transmitter with modular lock switch to lock the adjusted parameters of PIT and PLT.High quality individual lock tail gyro outside.The tail blade is driven by beltwork.

READY TO FLY. Only requires AA Batteries for Transmitter. About 6-8mins flight time for each charge Suitable for outdoor/Backyard/Park (100m area).

Applicable to:

Designed for the players who have experience on skilled flying Walkera Dragonfly 22D or Walkera Dragonfly 22E. Becoming fluent in flying this one, you can try to fly Walkera Dragonfly 60# . Suitable for experienced players with middle level flying outdoor to avoid damage.

Specification:

• Main rotor diameter: Approx. 630mm

• Tail rotor diameter: Approx. 145mm

• Overall length: Approx. 540mm

• Overall height: Approx. 195mm

• All-up weight: Approx. 580g (battery included)

• Gyro: G006

• Driven system: 380SD carbon brush motor

• Battery: Ni-MH 12V 650mAh

• Servos:4X9 g servo outside

• Control system: 6CH Multifunctional 72MHz Transmitter and Receiver
  

(via Walkera Dragongfly 36 Electric 3D Flight RC Helicopter @ Hobby-eStore.com $158.99)

Bell-47G 4CH Electric RC Coaxial Helicopter RTF

With the new BELL-47G you get a completely assembled and ready to fly micro heli with a coaxial counter-rotating head design that is so stable almost any first-time flyer can be hovering like a pro in no time. The BELL-47G features counter-rotating main blades that take out the rotational torque that makes hovering a challenge in normal heli designs. The counter rotating design makes rudder turns much easier by slowing down one or the other blade without destabilizing the heli.

Specification:

• Main Rotor Diameter: 345mm

• Length: 430mm

• Height: 165mm

• Weight RTF w/Battery: 212 g

• Main Motor: 180 motor

• Battery: 7.4V 800mAh Li-Po

• Transmitter: FM 4-Channel

• Servo: High-Speed, High-Torque

• On-Board Electronics: 4-in-1 Receiver/ Mixer/ ESC/ Gyro

(via Bell-47G 4CH Electric RC Coaxial Helicopter RTF @ Hobby-eStore.com $86.99)

SJM400 II 3D CCPM Aliminium - CNC Carbon Electric RC Helicopter Kit

This is the upgrading version G2 of SJM400, with hardened Aluminum Alloy brass anodized rotor head. The structure of weak places have been redesigned and optimized based on the previous version.

Specification:

• Kit weight (W/O main blade)：235g

• Main rotor diameter：655mm

• Main rotor specification： 305×30mm

• Flybar rod：210×1.5mm

• Flybar rod specification：58×30mm

• Tail rotor diameter：110mm

• Tail rotor specification：45×18mm

• Main shaft diameter：4mm

• Tail rotor shaft diameter：2mm

• Tail boom diameter (outer)： 11mm

• Drive belt specification：302MXL, width 2.5mm

• Revolving swash plate：ccpm120 degree

• Tail rotor blade：anti-shaking outer bearing in box shape

• Main drive gear：M0.4 180T

• Tail drive gear：M0.4 36

• Speed ratio of main and tail drive gear：1：5

Features:

• Fully CNC helicopter kit

• Aluminum alloy, Carbon and Fiberglass construction

• 36 bearings on the whole kit

• Contains 28 pcs high precision bearings and Metal rotor head and tail unit

• Belt driven tail system Extremely stable flying

• Highest machining precision

(via SJM400 II 3D CCPM Aliminium - CNC Carbon Electric RC Helicopter Kit @ Hobby-eStore.com $136.9)

2CH Syma 603 Radio Remote Control Helicopter RTF

FULLY ASSEMBLED, READY TO FLY

This helicopter is full function, left, right, hover and lands.

This rc helicopter has long sturdy and flexable long blades, very fast flight and 360 degrees movement in the air. The new design of this helicopter makes it one of the easiest to fly

Now the amazing experience of real helicopter flight can be enjoyed by everyone. This Syma 603 RC Helicopter is fully assembled with all pre-flight adjustments completed. Simply remove it from the box, charge and insert the batteries, and get ready to take-off.

Specification:

• Battery: Rechargeable 7.2V Ni-MH

• Radio Controller: 2 Channel

• Main Motor: Type 370

• Flight Time: 25~30 minutes

• Length: 510mm

• Width: 200mm

• Height: 150mm

Features:

• Comes with quality NI -MH 7.2V 650 mAH Battery and a Spower 370 Motor to give the helicoper plenty of power to create good preformance in flight.

• Great new modern 2007 design with simple to use on/0ff switch.

• The new tail fin design makes it very stable when flying in the air. Also has rotar speed control and a flight stablizing system.
  

(via 2CH Syma 603 Radio Remote Control Helicopter RTF @ Hobby-eStore.com $34.8)

Walkera Dragonfly 53#1 Electric RC Helicopter RTF

2007 Newest DragonFly 53#1 is more powerful, flies longer and has better servo resolution for more precision flying indoors and outdoors. ¡¡The helicopter is easy to fly and spot landing on the kitchen table or other platform presents an entertaining challenge. You will also be impressed with its stability!

The DragonFly 53#1 is a true Ready-to-Fly (RTF) product. Everything you need is included. To begin, you just got to get the battery charging right away.

Specification:

• Main Rotor Diameter (Upper): 450 mm

• Main Rotor Diameter (Lower): 450 mm

• Overall Length: 440 mm

• Drive System: 2X370 SH

• Battery: 7.4V 1250mAh Li-Po battery

• All-up Weight: 355g (Battery included)

• Transmitter: 4CH PPM

• 53#1 Receiver: RX-406

• Servo: weight 8.5g / speed 0.11sec/60¡ã(4.8V) / torque 0.9kg/cm (4.8V) / dimension 22.5X11.5X24mm

Features:

• Coaxial structure effectively offers stable flight and easy operation. The HM 53# series is an optional model for the early beginner.

• 53#1 design of metal main frame, metal swash plate and metal rotor head is of legerity, innovation, precise and stability.

• The combination of prompt servos ensures various flight courses.

• It is possible to adjust the servo extent and the sensitivity of built-in gyro. Customized fine adjustment makes your flight more perfect.

• The high-volume 7.4V 1250mAh Li-Po battery pack. A full charged cycle will offers the HM 53# series with 10- to 14-minute flight.

(via Walkera Dragonfly 53#1 Electric RC Helicopter RTF @ Hobby-eStore.com $167.9)

Walkera Dragonfly 22D Intruder FP R/C Helicopter RTF

Dragonfly 22d, 4ch, comes with a speed controller for 370 main motor, 3 servos for the aileron and elevator and tail blade pitch (no tail motor). Dragonfly 22D has been optimized for performance. It is very responsive and very quick to follow inputs from the pilot. Unique gear shaft drive system -- No tail motor to burn out or get damaged. All gears ensure durability. Can adjust the gyros and servos according to your requirement.Improved battery support, that holds the battery firmly, and can be adjusted to suit your balance of flying.Its main blades are built with high strength material, which greatly increases the lifting power. It can fly more than 15 minutes each charge( when using Lithium-Polymer Battery). It's a great helicopter, very well designed and very enjoyable. READY TO FLY, Only need 8 x AA Batteries for Transmitter.

Features:

• Length: approx. 22 inches

• Height: approx. 6 inches

• Main blade Diameter: approx. 21 inches

• Motor: High Torque 370 Series (carbon brush)

• Servo System: 3X9g Servos

• Transmitter: 4 Channel 72 MHz with servo reverser, upgradeable to 6 channel.

• Flight Weight: 330g (including battery)

• Battery: 9.6V 650mAh Ni-MH rechargeable battery, upgradeable to Li-poly Battery.

• Charger : 110V USA Wall Plug

• Unique gear shaft drive system -- No tail motor to burn out or get damaged. All gears ensure durability.

• High quality three-in-one circuit board reduces the flying weight

• 5-10 minutes flight time per charge(Li-Po battery can fly much longer)

• Pop off design rotor blades for those heavy landings.

• High quality and reliable all in one gyro, receiver and speed controller.

• 3-point ball bearing swash plate for precise hovering.

• Pre position servo mounts for easy set up.

• Powerful main electric drive motor for extended flight time.

(via Walkera Dragonfly 22D Intruder FP R/C Helicopter RTF @ Hobby-eStore.com $104.8)

Walkera 7CH Dragongfly 35#C Electric RC Helicopter RTF

Brand New! This is the 2007 latest model and new design RC dragonfly helicopter. It is high performance with 100% pre-built and ready to fly. The new Walkera 7CH Dragongfly 35#C comes with a new WK-G011 gyro. PIT and PLT knobs are also available with this new design 7 channel transmitter (WK-0701). You can lock your pre-set PIT & PLT parameter so you don't have to set it up everytime when you fly. A detailed English flying manual is included in the package not only just teach you take off and landing, but also teach you in 3D Aerobatic Flying, such as rolling and looping.

Specification:

• Overall Length: 600 mm

• Main Rotor Diameter: 630 mm

• Tail Rotor Diameter: 145 mm

• Speed Controller: WTS-20A-02

• Battery: 12V 650mAh Ni-MH

• Drive System: 380 SD

• All-up Weight: 600g (Battery included)

• Transmitter: WK-0701

• Gyro: WK-G011

• Receiver: RX-701

• Servo: weight 9.1g ; speed 0.12sec/60°; torque 1.1kg/cm;dimension 22.5X11.8X27mm

Features:

• NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights.

• Integrated structure of main body is innovative and compact in design. The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage .

• Tail blades driven by belt provide easy adjustment, stable flight, and low noise.

• 380SD motor as the main power is powerful and makes the flight much stable.

• A 7-channel transmitter (PCM701) can provide free adjustment of pitch (PIT) parameter, throttle curve and servo exponential function.

(via Walkera 7CH Dragongfly 35#C Electric RC Helicopter RTF @ Hobby-eStore.com $169.8)

NEW Walkera Dragonfly 5#8 Co, Axial 4CH Electric RC Helicopter RTF

The Brand New Walkera 5#8，it is the upgrade aluminum version of the 5#4 R/C Helicopter. Design of metal main frame, metal swash plate and metal rotor head is of legerity, innovation, precise and stability. 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE). Perfect for beginners or for simple indoor fun!!

Specification:

• Main Rotor Diameter (Upper): 340mm (13.4 inch)

• Main Rotor Diameter (Lower): 340mm (13.4 inch)

• Overall Length: 365mm (14.4 inch)

• All-up Weight: 227g (with battery)

• Driven System: 2X 180SH Carbon Brush Motor

• Servo: 2X 5.8g Servos (speed 0.11sec/60°(4.8V) / torque 0.5kg/cm (4.8V) / dimension 20X8.5X22.5mm) and inside Gyro

• Battery: 7.4V 800mAh Li-polymer

• Charger: Walkera GA-003 Lithium battery Charger

• Transmitter: 4CH PPM

• Receiver：RX-404

• Radio Control Range: 2500 feet (762m)

Features:

• Coaxial structure effectively offers stable flight and easy operation. The HM 5#8 is an optional model for the early beginner.

• Design of metal main frame, metal swash plate and metal rotor head is of legerity, innovation, precise and stability.

• The combination of prompt servos ensures various flight courses.

• It is possible to adjust the servo extent and the sensitivity of built-in gyro. Customized fine adjustment makes your flight more perfect.

• The high-volume 7.4V 800mAh Li-Po battery pack. A full charged cycle will offers the HM 5#8 with 8 to 12 minute flight.

(via NEW Walkera Dragonfly 5#8 Co, Axial 4CH Electric RC Helicopter RTF @ Hobby-eStore.com $128.8)

E-flite Blade CX Electric Coaxial Micro Helicopter RTF

With the new Blade CX you get a completely assembled and ready to fly micro heli with a coaxial counter-rotating head design that is so stable almost any first-time flyer can be hovering like a pro in no time. The Blade CX offers things other similarly designed micro helis can¡¯t ¨C the power and precision of E-Flite S75 servos, an advanced 4-in-1 controller, and a great looking, lightweight body that really stands out. The Blade CX features counter-rotating main blades that cancel out the rotational torque that makes hovering a challenge in conventional helis. They also make rudder turns much easier by slowing down one or the other blade without affecting the stability of the aircraft. This is truly a helicopter that most anyone can fly.

Specification:

• Type:Coaxial Electric Micro Heli

• Main Rotor Diameter:13.60 in (345mm)

• Gross Weight:RTF w/Li-Po battery, 8.0 oz (227 g)

• Length:15.75 in (400mm)

• Motor Size:Dual 180 main motors

• Kit/ARF/RTF:RTF

• Experience Level:Beginner

Features:

• Bonus: Now includes AC Adapter (EFLC4000) and 8 "AA" Batteries

• Coaxial, counter-rotating blade rotor head design provides incredible stability and positive control

• 4-channel 72MHz FM transmitter included

• Factory-installed E-flite S75 servos and 4-in-1 control unit

• No installation or assembly required

• Dual 180 motors makes the CX powerful and efficient

• 2-cell 800mAh Li-Po battery pack is low-weight and high-power, and provides flight durations of 10-15 minutes per charge.

(via E-flite Blade CX Electric Coaxial Micro Helicopter RTF @ Hobby-eStore.com $169.9)

Venom Night Ranger 3D RC Helicopter

The Night Ranger 3D is a high-performance ready-to-fly collective pitch aerobatic electric helicopter for indoor flying and outdoors on calm days. At about 400 grams, the Night Ranger 3D will fly for 5-8 minutes on the 9-Cell 650mAh NiMH battery, depending on the the type of flight. Although the 3D is not difficult to operate, it does take more skill and practice to master than a fixed pitch heli.

Specification:

• Main rotor diameter: 22.4" (570mm)

• Fuselage length: 20.9" (530mm)

• Tail Rotor Diameter: 5.8" (149mm)

• Weight: 13.7oz (390g)

• Charger Input: 120AC 60Hz 15W

• Output: 300 milliamps

Features:

• 6Ch FM Radio w/3 Micro Servos

• Bell-Hiller Style Head Assembly

• Alloy Headblock, Chassis, Tailboom & Skids

• 4-in-1 Gyro, Mixer, Receiver & ESC

• 9 Cell 10.8v 650 mah NiMH Rechargeable Battery

• AC Wall Charger

• 8 x AA Alkaline

• LiPO Battery Ready

• Easy Upgrade To Venom's Brushless System

(via Venom Night Ranger 3D RC Helicopter @ Hobby-eStore.com $199.9)

E-flite Blade CP+ Electric Micro Helicopter RTF

The Blade CP+ is the perfect ¡°next step¡± for anyone who's mastered the basics of heli flight with a coaxial heli like the Blade CX (EFLH1200) or Blade CX2 (EFLH1250), and is ready for a model capable of more advanced maneuvers. It¡¯s also an excellent choice for experienced pilots looking for the best in ready-to-fly micro helicopter performance and value.

The Blade CP+ includes all the impressive features of the original Blade CP, like CCPM and collective pitch, plus a number of new features and accessories that further enhance its flight performance for low-time and experienced pilots alike. The included, optional-use training gear set adds stability while also providing support and cushioning to prevent tip-overs and rotor blade strikes for newer pilots. The 3S 11.1V 800mAh Li-Po battery pack offers a significant boost in power and duration over the Ni- MH batteries found in other similar class models, and the included, optional-use symmetrical main rotor blades allow you to perform advanced aerobatics like loops, rolls and inverted flight without the need for a single hop-up. The separate receiver and advanced 3-in-1 control unit are plug-and-play compatible with brushless power systems and heading lock gyros so you can further enhance the capabilities of your Blade CP+ when you¡¯re ready to take performance to the next level.

The Blade CP+ is versatile enough to fly anywhere, and everything needed to fly is included and installed such as the 3S 11.1V 800mAh Li-Po battery pack and balancing charger, 370 main and N30 tail motor, 3-in-1 mixer, ESCs and gyro, three S75 sub-micro servos and a 6-channel FM radio system with servo reversing and CCPM mixing. Plus, each Blade CP+ is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box.

Nothing can touch the cutting-edge performance and value of the Blade CP+.

Specification:

• Type:RTF Electric CP Micro Heli

• Main Rotor Diameter:20.8 in (528mm)

• Tail Rotor Diameter:5.8 in (148mm)

• Gross Weight:RTF with Li-Po battery, 10.5 oz (298 g)

• Length:20.7 in (526mm)

• Motor Size:370 main motor, N30 tail motor

• Kit/ARF/RTF:RTF

• Control System:CCPM

(via E-flite Blade CP+ Electric Micro Helicopter RTF @ Hobby-eStore.com $199.9)

E-flite Blade 400 3D Electric Mini Helicopter RTF

The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i¡¯s advanced DSM2 protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision.

The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum's advanced DX6i 2.4GHz DSM2 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i's DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver.

The DX6i is not only perfectly suited for the Blade 400¨C¨Cit can also be used to fly just about any size and type of model due to its full-range and programming capabilities.

E-flite uses top-quality engineering and materials in everything it makes, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one.

Specification:

• Type:RTF Electric 3D Mini Heli

• Main Rotor Diameter:28.2 in (718mm)

• Tail Rotor Diameter:5.3 in (135mm)
  

• Gross Weight:RTF with Li-Po battery, 23.5 oz (665 g)

• Length:25.6 in (650mm)

• Motor Size:420H brushless outrunner, 3800kV

• Kit/ARF/RTF:RTF

• Control System:Spektrum DX6i 2.4GHz DSM2 computer programmabe transmitter (included),

• Spektrum AR6100e Microlite receiver (installed), DS75 Digital Sub-Micro Servos (4 installed), 120 degree CCPM

• Rotor Blade Length:12.8 in (325mm)

(via E-flite Blade 400 3D Electric Mini Helicopter RTF @ Hobby-eStore.com $469.9)

Venom Night Ranger 3D MICRO RC Helicopter RTF

The Venom Night Ranger 3D Micro comes RTF [Ready-to-Fly] and is an excellent choice for intermediate to advanced helicopter pilots. This amazing helicopter is one of the smallest 6ch heli's on the market, oh and did we mention that it's 3D!

The Night Ranger 3D Micro features a V-Series. 180 Brushed Motor, 4-in-1 Unit, Built in Gyro, ESC, Receiver, Mixer, Aluminum Chassis & Skids for Greater Durability & Strength, CCPM Swashplate Mixing & Collective Pitch Rotor Head and a LiPO Battery for Longer Flights. It includes a pre-assembled Night Ranger 3D Micro helicopter, 3s 200mah 10c LiPO Battery, 2-3 Cell LiPO Balance Charger, 6Ch FM Radio and (8) Venom Power, AA Alkalines. Everything you will need to enjoy this one of a kind helicopter in one package!

Specification:

• Length: 14"

• Width: 2 1/2"

• Height: 5"

• Battery Duration: 8-12min

Features:

• Ready -To-Fly

• True 3D Performance

• CCPM Swashplate Mixing & Collective Pitch Rotor Head

• Aluminum Chassis & Skids for Greater Durability & Strength

• Carbon Boom for Extra Stability

• V-Series 180 Brushed Motor

• 4-in-1 Unit, Built in Gyro, ESC, Receiver, Mixer

• LiPO Battery for Longer Flights

(via Venom Night Ranger 3D MICRO RC Helicopter RTF @ Hobby-eStore.com $249.9)

E-flite Blade CP Pro Electric Micro Helicopter RTF

Based on the tried and true Blade CP platform, the Blade CP Pro adds the lightweight power of a 3-cell 800mAh Li-Po battery pack, the lightning quick cyclic response of Bell-Hiller mixing, and the upright or inverted agility of symmetrical main rotor blades. Plus, it can easily be outfitted with brushless power and a heading lock gyro, without the need for a new radio system or difficult modifications. For red-hot micro heli aerobatics in about the time it takes for you to charge a battery pack, nothing can touch the cutting-edge Blade CP Pro.

E-flite uses top-quality engineering and materials in everything that's produced, providing you with the maximum level of value and fun. E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.

Specification:

• Type: RTF Electric Micro Heli

• Main Rotor Diameter: 20.3 in (515mm)

• Tail Rotor Diameter: 5.8 in (148mm)

• Gross Weight: RTF with Li-Po battery, 10.5 oz (298 g)

• Length: 20.7 in (526mm)

• Motor Size: 370 main motor, N30 tail motor

• Kit/ARF/RTF:RTF

• Control System:CCPM

(via E-flite Blade CP Pro Electric Micro Helicopter RTF @ Hobby-eStore.com $249.9)

E-flite Blade CX2 Electric Coaxial Micro Helicopter RTF

The Blade CX2 takes the excitement and beginner-friendly flight stability of the original Blade CX and adds Spektrum 2.4GHz DSM radio control that lets you fly anywhere, anytime without ever having to worry about interference. It's the first ready-to-fly RC aircraft of any kind to come with this extraordinary technology built in. In addition, the 4-in-1 control unit has been updated with improved gyro and tail control that gives the Blade CX2 even better tail response while minimizing drift. Two feather-light S60 Super Sub-Micro Servos provide powerful, precise cyclic control. Topping it all off is an aggressive new body design that looks fantastic in flight and is unlike anything else out there.

When it comes to micro heli fun everyone can enjoy, you simply can¡¯t beat the value and performance of the Blade CX2.

Specification:

• Main Rotor Diameter:13.6 in. (345mm)

• Gross Weight:8.0 oz (227 g) W/Battery

• Length:16.42in. (417mm)

• Motor Size:180 (2 installed)

• Control System:2.4GHz DSM 5-channel (included), 4-in-1 receiver/mixer/ESC/gyro

• (installed),S60 Super Sub-Micro (2 installed)

(via E-flite Blade CX2 Electric Coaxial Micro Helicopter RTF @ Hobby-eStore.com $189.9)

Venom Night Ranger II Helicopter

This is the 4ch RTF Night Ranger II. This helicopter is great for intermediate to advanced pilots. It includes an all new 4-in-1 Electronics Unit, A High Powered Venom Micro Fireball Motor, 2 Micro Servos, Carbon Reinforced Main Blades, an 8.4v NiMH 7 cell battery, AC wall charger and is LiPO battery compatible. The charge time on the 800mah battery should be about 2 hours and 17 minutes. During the charge time, the Voltage should reach about 10.5 and the temp should be about 95.6¡ã. The flight time on a full charge is about 10-15 minnutes depending on how often you are using full throttle. The gyro indicator light is not green, it is red. When the gyro is initializing, the light will blink rapidly for 5-10 seconds. Once initialized the indicator light will be a slowly flashing red light. If the light does not blink after the battery is connected, please check that you have switched on the transmitter and that the battery has been fully charged.

Specification:

• Main rotor diameter: 21" (530mm)

• Fuselage length: 20" (500mm)

• Weight: 9.9-10.6oz (280-300g)

• Charger Input: 120AC 60Hz 15W

• Output: 300 milliamps

Features:

• 4Ch FM Radio

• An All New 4-in1 Electronics Unit

• 10-15 min Flight Time

• A High Powered Venom Micro Fireball Motor

• 2 Micro Servos

• Carbon Reinforced Main Blades

• LiPO Battery Compatible

Save It: Hobby-Estore.com Only $149.90

Venom Micro Rescue Helicopter Ready to Fly

With it's compact size, the Micro Rescue is perfect for flying indoors or in tight spaces. It's supplied completely ready to fly and you can lean how to take-off, hover, descend, turn left and right with a fixed forward motion.Made from durable plastic, the realistic body design has two main rotors and a tail rotor for steady indoor flight.

With the integral Lithium Polymer battery the helicopter has a flight time of up to 6 minutes and can be charged in 20-30 minutes.

Specification:

• Gender:Unisex
  

• Experience Level:No Experience Necessary

• Recommended Environment:Indoor

• Is Assembly Required:No
  

Save It: Hobby-Estore.com Only $27.90

Phoenix FP 4CH Electric RC Helicopter RTF

The Phoenix FP is one of the best micro helicopters on the market. It is a micro

Electric Helicopter that is pre-trimmed and test flown before packaging to ensure that you will receive a 100% flying helicopter when you open the box for the very first time. The 100% Ready to Fly model makes a wonderful beginner's helicopter and is also great for the experienced pilots.. The helicopter comes complete with Dynam 4Ch. radio control, 6Ch. receiver, 3 in 1 mixer, motor and 8.4v battery for helicopter, 110-230v charger. The only thing to do is to learn to pilot the helicopter with the new Dynam 4Ch. radio transmitter.

Specification:

* Main rotor diameter: 510mm (20.1 in)

* Fuselage length: 470mm (18.5 in)

* All-up-weight: 288g (10.2 oz)

* Motor type: RK370SD

* Power: 8.4V 600mah battery pack

* RC: 4CH / 2micro servo

Save It: Hobby-Estore.com Only $89.60

Esky 4CH LAMA V4 Co-Axial Easiest Fly RC Helicopter RTF

With the new LamaV4 you get a completely assembled and ready to fly micro heli with a coaxial counter-rotating head design that is so stable almost any first-time flyer can be hovering like a pro in no time. The LamaV4 offers things other similarly designed micro helis can’t – the power and precision of ESKY 8g servos, an advanced 4-in-1 controller, and a great looking, lightweight body that really stands out. The LamaV4 features counter-rotating main blades that cancel out the rotational torque that makes hovering a challenge in conventional helis.They also make rudder turns much easier by slowing down one or the other blade without affecting the stability of the aircraft. This is truly a helicopter that most anyone can fly and beyond your dream.

Specification:

• Main rotor diameter: 340mm;

• Weight: 230g

• Length: 408mm,

• Width: 85mm,

• Height: 180mm;

• Power system: 180 motor*2

• Transmitter: Standard 4 CH

• Mix controller: 4 in 1 controller (W/gyro, mixer, ESC, receiver);

• Servo: 8g, 1.3kg.CM, 0.12s/60°

• Battery: 7.4V 800mAh Li-polymer battery

Features:

• Coaxial, counter-rotating blade rotor design, provides incredible stability and positive control.

• Full RC system set Included, ready to flight out of box.

• Pre-installed ESKY 8g servos and 4-in-1 control unit

• No installation or assembly required.

• Dual 180 motors makes the LamaV4 powerful and efficient.

• 800mAh 2-cell Li-Po battery pack is low weight, high power and provides flight durations of 10-15 minutes per charge.

Save It: Hobby-Estore.com Only $83.90

2-CH Electric RC Helicopter- Aerobus Radio Remote Control Helicopter w/ Launch Pad

Features of the 2-CH Aerobus Radio Remote Control Electric RC Helicopter include Proportional Control, Altitude & Rotor Speed Control, Flight Stabilizing System, Lightweight Airframe, and All Molded Plastic and Foam Construction. This Aerobus RC Helicopter comes with Super Tough, Launch Pad Charging Station, Brake for Easy Landing and more that needs to fly!

The electric rc helicopter can move Up, Down, Left & Right. The 2-CH Aerobus Radio Remote Control Electric RC Helicopter features Proportional Control, Altitude & Rotor Speed Control, Flight Stabilizing System, Lightweight Airframe, and All Molded Plastic and Foam Construction. Ths Aerobus RC Helicopter comes with Super Tough, Launch Pad Charging Station, Brake for Easy Landing and more that needs to fly! The Aerobus electric rc helicopter can flies over 15M high. It's time for you to soar in the sky with this great helicopter!

Features:

• 360 Degrees (Full Function)

• Flies over 15M High

• Proportional Control

• Altitude & Rotor Speed Control

• Flight Stabilizing System

• Launch Pad Charging Station

• Brake for Easy Landing

• Charges in Just Minutes

• Lights Up!

Save It: Hobby-Estore.com Only $49.99

Esky E005 Honey Bee Upgrade 3D CP2 CCPM 6CH RC Helicopter RTF

Complete and ready-to-fly the kit includes everything except 8 AA batteries for the transmitter. Upgraded motor and symmetrical wooden blades are pre-installed at the factory for full 3D performance right out-of-the box. Now comes with new style balanced Li-po charger.

This model is suitable for r/c helicopter intermediate pilot, 3D aerobatic action and inverted flight is possible! Stunt flyer!

Features:

* 120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.

* Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.

* O-ring inside the center hub reduce oscillation of main blades

* 11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).

* Light and hardened wood blade provide great lift, only weigh 11g.

* Metal ball swashplate has improved the stability and sensitive of the whole machine.

* Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.

* With length-adjustable servo push-rod, precision sub trim can be easily set.

* Separate main shaft and main gear reduce repair time and noise.

* Extended tail boom, reduced the load of tail motor.

* Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.

* Provide excellent performance outdoor and indoor.

Save It: Hobby-Estore.com Only $114.30

Time Limited! Bell-47G 4CH Electric RC Coaxial Helicopter RTF

With the new BELL-47G you get a completely assembled and ready to fly micro heli with a coaxial counter-rotating head design that is so stable almost any first-time flyer can be hovering like a pro in no time. The BELL-47G features counter-rotating main blades that take out the rotational torque that makes hovering a challenge in normal heli designs. The counter rotating design makes rudder turns much easier by slowing down one or the other blade without destabilizing the heli.

Specification:

• Main Rotor Diameter: 345mm
  
• Length: 430mm
  
• Height: 165mm
  
• Weight RTF w/Battery: 212 g
  
• Main Motor: 180 motor
  
• Battery: 7.4V 800mAh Li-Po
  
• Transmitter: FM 4-Channel
  
• Servo: High-Speed, High-Torque
  
• On-Board Electronics: 4-in-1 Receiver/ Mixer/ ESC/ Gyro

(via Bell-47G 4CH Electric RC Coaxial Helicopter RTF @ Hobby-Estore.com Time-limited On Sale Price $86.99! Expiration Date:Promotion End by 10th December)